Product Information

• To ensure an even burn, make sure to allow the candle to burn until the wax melts across the entire surface, reaching the outer rim of the vessel.
• Burn for a minimum of 2 hours and a maximum of 4 hours.
• Trim the wick before every use to 5mm.
• Extinguish your candle using a snuffer. It's the safest way to prevent hot wax splatter.

Open your OLOR Reed Diffuser:

• Carefully unscrew the cap and remove the inner plug.

Prepare for Diffuser:

• Screw the cap back onto the bottle and insert the reeds

Allow Time to Fill the Room:

• The reeds will begin drawing up the fragrance, diffusing it into the air.
• Give it 48 hours for the fragrance to fill the room with scent.

Adjusting the Intensity:

• Use 4-5 reeds for a stronger fragrance or 2-3 reeds for a more subtle scent.

Handle with Care:

Remember to wash your hands after handling the reeds

Top Tips for Optimal Performance of Your OLOR Reed Diffusers

• Perfect Placement: Experiment with different areas in your space to find the ideal spot for your reed diffuser. Opt for areas with good airflow, such as near windows or fans, to ensure maximum scent dispersion.
• Combat Noseblindness: If you find yourself no longer detecting the fragrance from your reed diffuser, try moving it to a different room or closing the door for a while. This helps reset your olfactory senses, allowing you to experience the scent anew.
• Maintenance Matters: Regularly wipe the reeds with a clean cloth or paper towel every few weeks to remove any dust or debris. This helps maintain optimal scent diffusion and keeps your reed diffuser performing at its best.

By following these top tips, you'll be able to revive the delightful scent of your OLOR reed diffusers and create a captivating and fragrant atmosphere in your space. Happy diffusing!

• Choose a segment from the 6 segment wax melt pack.
  
• Place it in a wax melt burner or warmer.
  
• Light a tealight or switch on the warmer.
  
• Enjoy the scent as the wax melt (approx. 4 hours per segment).
  
• Extinguish the tealight or switch off the warmer.
  
• Let the wax cool and solidify.
  
• Re-melt the same segment or choose a new one to continue enjoying the scent.
  
• Each pack provides approximately 24 hours of burn time.
  

To remove the wax from your burner, wait for it to fully cool down. Then, gently push the wax, and it should easily come out as one whole piece. Enjoy the effortless cleaning process and get ready to experience the next delightful scent.

Our oils are specially designed for use in electric aroma mist diffusers and are to be diluted with water only. Follow these simple instructions for a blissful aromatic experience:

• Fill your aroma diffuser with approximately 100ml of water.
• Add 6-8 drops of OLOR Fragrance Oil to the water.
• Close the aroma diffuser securely.
• Turn on the diffuser and let the magic begin!

As the fragrance oil mixes with the water, a long-lasting mist will be released, filling your space with the enchanting aroma of your favorite OLOR fragrance. Remember, our oils are highly concentrated, so a little goes a long way. Start with a conservative amount, and add more if desired.

Important: Please note that OLOR Fragrance Oils are not intended for use with oil burners. Stick to using them solely with electric aroma mist diffusers for optimal results.